Rack elevation diagram
Enter the rack's height in U, then each device's lowest U and height. You get a count of the U used and free and a front and rear drawing, true to scale, with U1 at the bottom. Half units and shallow devices are allowed. Nothing is uploaded.
What an elevation shows
A rack elevation is a flat view of one face of a rack, with U1 at the bottom. It shows which device sits where, so someone standing at the rack can find it, and how much room is left.
Front and rear
The rear view is drawn as the rack looks from behind, where the power supplies and the PDUs are. Shallow devices sit on the front or the rear face, so two can share one U.
Overlaps are refused
Two devices on the same face cannot share a U, and a full-depth device takes the U on both faces. A device that overlaps another is left out of the drawing with a message saying which one it clashes with. This is the same rule the full tool uses.
Add the power
An elevation says where things are. It does not say what happens when power goes. In the full tool, add PDUs and cords and switch a feed off to see what goes dark. It prints elevations on A3 sheets with a device schedule.
Questions
Does it have my device?
The full tool's library lists about 4,600 models from a community-maintained list, with heights and depths that may be wrong or missing. Here, type the height yourself.
Does it export to CAD?
No. The drawing prints from the browser, and the browser's print dialog can save it as a PDF.
Does it do a whole room?
The full tool takes up to 24 racks.
Is a rack elevation the same as a floor plan?
No. An elevation is a view of a rack. A floor plan is not part of this tool.
Does it save?
Not as a file. This page keeps what is typed in its own address, after the # mark, so a reload or a copied link shows the same rack; nothing is sent. The full tool keeps your room in your browser on this device, and saves it to a file you choose.